MHD F+G Series

MHD F+G Series

App ID	com.mhd.flasher.fseries
Size	186.1 MB
Version	version 3.82
Updated	2022-04-28
Developer	MHD Tuning UG

Apps in the Same Category:

• Benz S600 Drift Simulator 5.1
• Hitung Kapasitas Volume Mesin Motor (CC) 1.0
• اسواق -Asuaaq 1.73
• Transponder 1.0.144
• Tofas Drift Simulator 1.4
• Roav DashCam 4.2.1
• Omega: taxi service 3.13.0
• EVgo 7.2.0
• Prezzi Benzina 3.22.05.23
• BlueDriver 7.13

• <<
• 1
...
• 19
• 20
• 21
• 22
• 23
• 24
• 25
• 26
• 27
• 28
• 29
...
• 46
• >>

The MHD Flasher F+G Series is a complete flash tuning app for your BMW & Toyota Supra A90. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance, maximum safety, and unrivaled drivability.
———————————————
Full OBD Flashing:
You can install MHD right at home and start tuning immediately! Simply download the MHD Flasher F+G-Series app that connects via a MHD WiFi adapter and your vehicle’s OBD-II port, start the app and within 5 minutes the initial installation is complete. Further map changes are much faster – only 20 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.
———————————————
Stage 1, Stage 2 und E85 OTS (Off The Shelf) Maps by PureBoost:

N55 EWG (Vehicles built after 07/2013 with electronic wastegate):
– Stage 1 (up to 360HP/540NM) (not available for M2 and X4 M40i)
– Stage 2 (up to 390HP/580NM)
– Stage 2+ (up to 430HP/630NM)
– Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%

N55 PWG (pneumatic wastegate):
– Stage 1 (up to 340HP/540NM)
– Stage 2 (up to 370HP/580NM)
– Stage 2+ (up to 400HP/630NM)
– Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%

S55 (BMW M3 / M4 F8x):
– Stage 1 (up to 530HP/700NM)
– Stage 2 (up to 560HP/780NM)
– Ethanol Mix Maps: Stage 1, 2 and 2+ E30 Maps for ethanol blends of 30%

B58:
– Stage 1 (up to 440HP/600NM)
– Stage 2 (up to 470HP/650NM)
– Stage 2+HPFP (up to 500HP/700NM)
– Ethanol Mix Maps: Stage 1, 2 Maps for ethanol blends of 30%

S58:
– Stage 1 (up to 630HP/750NM)
– Stage 2 (up to 700HP/850NM)
– Ethanol Mix Maps (up to 750HP / 880NM): Stage 1 & 2 E30+ Maps for – ethanol blends of 30%+

S63:
– Stage 1 (up to 720HP/900NM)
– Stage 2 (up to 780HP/950NM)
– Ethanol Mix Maps (up to 800HP/1000NM): Stage 1 and 2 Maps for ethanol blends of 30%+

N13:
Stage 1 (up to 200HP/280NM, 93oct/98RON)
Stage 2 (up to 235HP/350NM, 93oct/98RON)
———————————————
Full Data Logging and Live Gauges: Monitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout. 50+ engine parameters are available at a glance!
———————————————
These flash options can be applied to any map directly through the app:

– Anti Lag (N55/S55/N13 only at the moment)
– Exhaust Burble (duration & aggressiveness, min/max speed, min/max rpm)
– Remove top speed limiter (Vmax)
– CAN ethanol content reading (N55/S55/N13 only at the moment)
– Cold start noise reduction
– Exhaust flap open in sport mode
– Limit power per gear
– XHP TCU flash support (optimized OTS maps)
– Sport cooling mode for increased water / air intercooler cooling
– and many more
———————————————
Check out our homepage / user manual for more information, supported cars and recommended modifications for each stage.